沧州LF-3/8-D-5M-MIDI-NPT

ZhongHaiDe (Fujian) Industrial Equipment Co., established in 2014 in Fuzhou, is a leading equipment supplier in the field of automation in China.

Our company distributes globally renowned brand industrial automation products mainly from Europe, the United States, Japan and other developed countries,such as ABB, Foxboro, Yaskawa, Sew and so on.

Among all these companies, Yaskawa as a world class Transmission Product Manufacturers from Japan, which has a history more than 100 years. It provide a lot kinds of products, such as inverters, servo drives, controllers and robots. It can provides our customers a lot of choices.

With professional and first-class technology and business team, our company provides customers with high quality products and perfect after-sales service. And we he formed a mature model for service of system users. It has realized the humanization of services, the simplification of processes and the standardization of management, effectively helping customers extend the life cycle of electrical equipment and reduce Operating costs, control the risk of stop production, increase production efficiency!

Our products are reliable and cost-effective, if you want to know more about our products, just click here: http://www.zhdfj.com/. or: fjzhdcm@outlook.com or ayj897463393@gmail.com. also you can add wechat :13376990653. QQ:3004650323  We’re looking forward to your visit.

ADVU-50-60-P-AE
ADN-40-80-A-P-A
DFM-25-100-P-A-KFS
ADN-50-10-A-P-A
LFR-1/2-D-7-O-MIDIT
ADN-50-50-I-P-A
HEL-D-MIDIO
ADVC-10-5-A-P
SMB-3-B
ADVC-12-10-A-P
DSEU-32-50-P-A
ADVC-12-10-I-P
PFAN-12X1,75-NT
ADVC-16-5-I-P-A
PFAN-8X1,25-NT
ADVC-20-10-I-P
FRC-1-D-MAXI-A
ADVC-40-15-I-P-A
ADN-25-50-A-P-A
ADVC-40-25-A-P-A
LF-1/4-D-5M-MIDI
ADVU-12-10-A-P-A
LF-1/4-D-5M-MIDI-A
ADVU-12-10-P-A
DNC-40-40-PPV-A
ADVU-12-15-A-P-A
VO-3-1/4-B
ADVU-12-20-A-P-A
DHWS-10-A
ADVU-12-25-A-P-A
DNC-32-10-PPV-A泵的排出侧装设阀门（球阀或截止阀等）和逆止阀。阀门用来调节泵的工况点，逆止阀在液体倒流时可防止泵反转，并使泵避免水锤的打击。（当液体倒流时，会产生巨大的反向压力，使泵损坏）确定流量扬程流量的确定如果生产工艺中已给出小、正常、大流量，应按大流量考虑。如果生产工艺中只给出正常流量，应考虑留有的余量。对于ns1的大流量低其不意扬程泵，流量余量取5%，对ns5的小流量高扬和泵，流量余量取1%，5ns1的泵，流量余量也取5%，对质量低劣和运行条件恶劣的泵，流量余量应取1%。原料药淤浆均匀度较差，造成加料管堵塞，形成间隙加料的不均匀，而产生了振动。加料时转鼓转速太高，物料没有再分布的机会，以致不均匀造成振动。离心机滤网脱水效果不均匀，造成滤网上母液分布不均，引起振动4.吊杆减振能力差，一但有振动，则会恶性循环造成大损坏。底座刚性不足，以致振动加剧。设备上总电源开关（漏电断路器）跳脱或损坏。滤布未张紧，形成滤布驱动机空转，无法带动滤布行走。作动之空压机压力未达设定值（一般约3kg∕cm2左右），或压力设定开关损坏。空压泄压阀未开启（位于三点组合之前端蓝色拉环）。.滤布驱动机之电控热继电器跳脱或损坏11.滤布异常偏离造成碰触限制开关，警报作响。.丝烧毁。因应对策检(送)修或换新品。换张紧弹簧.待空气压缩机压力到达设定值后再开机。手动将泄压阀向上拉起，完成开启动作，管路接通后压力表会有压力值显示，到达压力设定值后，即可开启运转。检(送)修或换新品.检修查出故障原因，将故障确实排除。